Search results for "Halide perovskites"
showing 10 items of 13 documents
First-principles calculations of iodine-related point defects in CsPbI3
2019
Many thanks to A. Lushchik, A. Popov and R. Merkle for numerous fruitful discussions. This study was partly supported by the Latvian Council for Science (grant LZP-2018/1-0147 to EK). R.A.E acknowledges the assistance of the University Computer Center of Saint-Petersburg State University for high-performance computations.
Charge Transport Layers Limiting the Efficiency of Perovskite Solar Cells: How To Optimize Conductivity, Doping, and Thickness
2019
Perovskite solar cells (PSCs) are one of the main research topics of the photovoltaic community; with efficiencies now reaching up to 24%, PSCs are on the way to catching up with classical inorganic solar cells. However, PSCs have not yet reached their full potential. In fact, their efficiency is still limited by nonradiative recombination, mainly via trap-states and by losses due to the poor transport properties of the commonly used transport layers (TLs). Indeed, state-of-the-art TLs (especially if organic) suffer from rather low mobilities, typically within 10(-5) and 10(-2) cm(-2) V-1 s(-1), when compared to the high mobilities, 1-10 cm(-2) V-1 s(-1), measured for perovskites. This work…
Large area perovskite light-emitting diodes by gas-assisted crystallization:
2019
Halide perovskites have been gaining considerable attention recently for use in light-emitting applications, due to their bandgap tunability, color purity and low cost fabrication methods. However, current fabrication techniques limit the processing to small-area devices. Here, we show that a facile N 2 gas-quenching technique can be used to make methylammonium lead bromide-based perovskite light-emitting diodes (PeLEDs) with a peak luminance of 6600 cd m −2 and a current efficiency of 7.0 cd A −1 . We use this strategy to upscale PeLEDs to large-area substrates (230 cm 2 ) by developing a protocol for slot-die coating combined with gas-quenching. The resulting large area devices (9 device…
Degradation mechanisms in organic lead halide perovskite light-emitting diodes
2019
Organic–inorganic metal halide perovskites have attracted significant attention for low-cost, high-efficiency, color-pure light-emitting applications. However, as seen in many reports so-far, perovskite light-emitting diodes (PeLED) suffer from poor operational lifetime, limiting their practical use. The underlying degradation mechanism is a topic of crucial importance. Here, the degradation mechanisms of methylammonium lead bromide based PeLED are investigated. When the PeLED is electrically biased, there is an initial raise in the luminance followed by a rapid reduction in luminance and current density. Microscopic studies reveal the formation of micrometer-sized spots that are photolumin…
Tuning the Ultrafast Response of Fano Resonances in Halide Perovskite Nanoparticles
2020
International audience; The full control of the fundamental photophysics of nanosystems at frequencies as high as few THz is key for tunable and ultrafast nanophotonic devices and metamaterials. Here we combine geometrical and ultrafast control of the optical properties of halide perovskite nanoparticles, which constitute a prominent platform for nanophotonics. The pulsed photoinjection of free carriers across the semiconducting gap leads to a subpicosecond modification of the far-field electromagnetic properties that is fully controlled by the geometry of the system. When the nanoparticle size is tuned so as to achieve the overlap between the narrowband excitons and the geometry-controlled…
Highly Stable Thin Films Based on Novel Hybrid 1D (PRSH)PbX3 Pseudo-Perovskites
2021
In this study, the structure and morphology, as well as time, ultraviolet radiation, and humidity stability of thin films based on newly developed 1D (PRSH)PbX3 (X = Br, I) pseudo-perovskite materials, containing 1D chains of face-sharing haloplumbate octahedra, are investigated. All films are strongly crystalline already at room temperature, and annealing does not promote further crystallization or film reorganization. The film microstructure is found to be strongly influenced by the anion type and, to a lesser extent, by the DMF/DMSO solvent volume ratio used during film deposition by spin-coating. Comparison of specular X-ray diffraction and complementary grazing incidence X-ray diffract…
Polymer/Perovskite Amplifying Waveguides for Active Hybrid Silicon Photonics
2015
The emission properties of hybrid halide perovskites are exploited to implement a stable and very low power operation waveguide optical amplifier integrated in a silicon platform. By optimizing its design with a poly(methyl methacrylate) (PMMA) encapsulation, this novel photonic device presents a net gain of around 10 dB cm−1 and 3–4 nm linewidth with an energy threshold as low as 2 nJ pulse−1 and exhibiting no degradation after one year. This work was supported by Generalitat Valenciana (Project No. ISIC/2012/008), the Universitat Jaume I (Project No. 12I361.01/1), Spanish MINECO (Projects Nos. MAT2013-47192-C3-1-R and TEC2014-53727-C2-1-R) and EU-NAVOLCHI (Project No. 288869).
Controlling the Phase Segregation in Mixed Halide Perovskites through Nanocrystal Size
2019
Mixed halide perovskites are one of the promising candidates in developing solar cells and light-emitting diodes (LEDs), among other applications, because of their tunable optical properties. Nonetheless, photoinduced phase segregation, by formation of segregated Br-rich and I-rich domains, limits the overall applicability. We tracked the phase segregation with increasing crystalline size of CsPbBr3–xIx and their photoluminescence under continuous-wave laser irradiation (405 nm, 10 mW cm–2) and observed the occurrence of the phase segregation from the threshold size of 46 ± 7 nm. These results have an outstanding agreement with the diffusion length (45.8 nm) calculated also experimentally f…
Influence of mobile ions on the electroluminescence characteristics of methylammonium lead iodide perovskite diodes
2016
In this work, we study the effect of voltage bias on the optoelectronic behavior of methylammonium lead iodide planar diodes. Upon biasing the diodes with a positive voltage, the turn-on voltage of the electroluminescence diminishes and its intensity substantially increases. This behavior is reminiscent of that observed in light-emitting electrochemical cells (LECs), single-layer electroluminescent devices in which the charge injection is assisted by the accumulation of ions at the electrode interface. Because of this mechanism, performances are largely independent from the work function of the electrodes. The similarities observed between planar perovskite diodes and LECs suggest that mobi…
Doping induced stable room temperature dual emission from gadolinium doped vacancy ordered double halide perovskite, Gd:Cs2SnCl6
2022
The recent advancement in bandgap engineering through controlled doping has widen the prospectof vacancy ordered double halide perovskites (VO DHPs) by conferring them with designableoptoelectronic properties. Here, we report synthesis of Gd doped Cs2SnCl6 via a simplesolvothermal method. Gd3+ ions doping lowers the band gap from 3.8 eV to 2.8 eV and facilitatesstable room temperature dual PL emission centered at 440 nm and 610 nm. The macroscopicemission process is well supported by the confocal PL emission studies on isolated crystallites.Both the pristine (Cs2SnCl6) and Gd:Cs2SnCl6 exhibit crystalline cubic structure with Fm3m spacegroup. Rietveld refinement correlates well with the cubi…